The notice when using riveting machine

Riveting machine is essential equipment to many riveting industry. When using the riveting machine, it should be noted the following matte.

1. In the riveting process, the riveting machine must be compressed to avoid the accident of the hammer flying out.

2. If the head part has fever, it shold be put in the cold water to reduce its tempreture. When equited the machine it should be added small amount of lubricating oil in the tail of the machine.

3. Check whether the handle and cylinder connection is strong. If found loose, riveting machine should be adjusted immediately.

4. The barrier should be sent to the inspection and maintenance department, not at the workplace.

5. Rivet machine can not be used if it exceeds the service life.

6. The riveting machine can not work under intensive pressure.

7. The length of the riveting head shall not exceed the specified length.

8. For high-end riveting machine, especially pneumatic riveting machine, its radial equipment should often oil lubrication.

9. if you hear the machine has abnormal sound, must immediately stop the overhaul, direct troubleshooting.

10. Check the rivet head once every month, and do the assembly and disassembly check. In the disassembly time to despise, especially do not use brute force to remove the rivet head, the rivet head should be rotated and pulled out slowly down.

11. When installation, if the rivet holder is pulled out of the normal position, the rivet head position will be obvious deviation after installing the rivet head. The red safety cover should be removed at this time, and the riveted seat will be installed before it can be used;

12. The rivet machine needs to be checked before use, and must be maintained after inspection to make it lubricated and rustproof;

13. Rivet machine in the processing of certain materials, the rivet head will appear slight bonding phenomenon. In order to ensure the quality of riveting, the rivet head should be cleaned at regular intervals to prevent metal bonding. When cleaning, the rivet head is fixed on the chuck of the lathe, and then polished with sandpaper.

Dongguan Anlian Hardware Machinery Co., Ltd is a professional equipment manufacturer of pearl and nail riveting machine, riveting machine, eyeleting machine and computer sewing machine. At the same time, according to the customer demand, the company can customize all kinds of pearl and nail riveting machine, riveting machine and eyeleting machine equipment and related accessories. Welcome to contact us through the website: http://www.machinefty.com or the phone number: 0769-230388455 or 13266190666.